您好,欢迎来到邦诺机械有限公司!
产品展示
PRODUCTS
电话:0757-22818555
传真:0757-22818108
邮箱:belino@126.com
地址:www.belino.cn
产品展示
您现在的位置: 首页 > 产品展示 > 台面加工工具

特点

钻孔架质轻,便于携带。两个204mm的真空吸盘可将其牢固地吸附在平滑无孔的表面上,真空垫可沿着导轨进行调节,这使得钻孔导轨可以在安装表面完成横跨切口安装。钻孔导轨可在距离轨道中心的一定范围内进行调节。导轨上的中央仪表和测量带可实现导轨快速准确的安装。橡胶吸盘不会在表面留下印痕或造成损坏。红色真空指示器会在真空环境流失的情况下发出警示。

Characteristics

Drill stand is light-weight and portable.Two 204mm vacuum cups attach the unit securely and smoothly to nonporous surfaces.Vacuum pads are adjustable along the guide rail which allows the drill guide to be positioned across cut-outs on mounting surface.It can also guide the drill to move and adjust certain range on the guide rail from centre to both sides.Centre pointer and measuring tap on guide rail are able to rapidly and accurately confirm the center of the derivable drill.Rubber cups will not mark or damage most stone surfaces.Red-line vacuum indicator warns whether air leakage occurs.

 

型号

CODE

导轨长度

GUIDE RAIL LENGTH

吸盘直径

DIAMETER OF VACUUM CUP

钻孔导轨距离导轨中心的可调节范围

ADJUSTABLE DRILL GUIDE RANGE

DSA02 210mm 204mm 75mm

 

地 址:广东省佛山市顺德区伦教荔村丁字路22号
电话:0757-22818555  传真:0757-22818108